[TR] Ratco Throttle Linkage

[Sam Clark]

I found the website for Ratco but, unfortunately, it won't solve my problem.
I have a '72 GT6 with Strombergs and it doesn't have the same linkage as the
TR6 or earlier GT6.  There is not a cross shaft but, instead, a cable pull
that comes from the pedal across the top of the engine to a center top pull.
The only adjustment is for play in the linkage.  The problem I have is that I
can't get full open on the butterflies.  Instead I get about 60%.  Any
suggestions?
Sam
On May 7, 2012, at 12:15 AM, triumphs-request at autox.team.net wrote:

> From: "Alex & Janet Thomson" <aljlthomson at charter.net>
> To: "'Dave Connitt'" <dconnitt at fuse.net>, <triumphs at autox.team.net>
> Subject: Re: [TR] Ratco throttle linkage
> Message-ID: <002801cd2bf0$203a9cf0$60afd6d0$@charter.net>
> Content-Type: text/plain; charset="us-ascii"
>
> Dave - Try the following -
>
> www.rat-co.com
> or
> http://www.sites.google.com/site/tonyratco/
>
> Alex Thomson
>
>
> -----Original Message-----
> From: triumphs-bounces at autox.team.net
> [mailto:triumphs-bounces at autox.team.net] On Behalf Of Dave Connitt
> Sent: Sunday, May 06, 2012 7:46 PM
> To: triumphs at autox.team.net
> Subject: [TR] Ratco throttle linkage
>
> I was just looking for the RATCO cable throttle linkage and google can't
> find them.
> Interresting....
> Dave Connitt