[TR] Horn with a mind of its own

[terryrs at comcast.net]

Back to this, one question:

>FWIW, on my engine with the inadequate liner protrusion, I found that adding
>the 20 AWG "half hard" copper wire to a stock head gasket was easy and very
>effective.  Superglue didn't occur to me, so I used ordinary 'electronic'
>grade solder and a soldering gun. 

Randall, what size gun did you use?  I've always had a hard time heating a big surface with a gun enough to solder a wire to it.  

Terry Smith, '59 TR3A
New Hampshire