[TR] Tr2 or tr3 steering boot install tips anyone?
ahwahneetr at gmail.com
Tue Mar 27 11:45:05 MDT 2012
I've used a wire hose clamp and the single screw for many decades -- always
thought it was as original.
On Tue, Mar 27, 2012 at 7:43 AM, davewillner <davewillner at pa.net> wrote:
> ...also snugged an OEM type wire clamp on the column end, but I greased
> the boot a bit on the inside and didn't really tighten it too tight, this
> way it won't turn with the column...
On mine the clamped bit is on the outer column which doesn't turn.
More information about the Triumphs