[TR] Lucas Batt Cap screws

[John Macartney]

The factory used a simple cheese head drive screw - about a #8 1/2" Battery
posts were already pre-drilled (as were all of them in Europe) 30+ years ago.
Jonmac
     
________________________________
 From: "wbeech at flash.net"
<wbeech at flash.net>
To: triumphs at autox.team.net 
Sent: Thursday, 22 March 2012,
17:06
Subject: [TR] Lucas Batt Cap screws


>Got the battery cable soldered
into those helmet-type Lucas post connectors.
>
>
>Now, what is the correct
type/size of screw to secure the cap to the post?
>Looks like a stainless wood
or sheet metal screw might do the job as I am
>not sure a machine thread would
hold in the lead post.
>
>Thanks,
>Bill 
>
>** triumphs at autox.team.net **
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/flywheelcoventry1@yahoo.co.uk