[TR] TR3/4 Rear wheel hub runout

[Tony Drews]

You won't feel 0.025" runout at the wheel.

Tony Drews

At 11:07 PM 6/20/2012, Randall wrote:
>Listerati:
>
>Any thoughts on what is an acceptable level of runout in the rear hubs?
>I've measured about .005" TIR on two hubs now, which seems pretty minimal to
>me.  But I thought I'd ask what others think.
>
>I'm measuring at about 2.75" from the center, so I think that works out to
>less than .025" at the road.
>
>Trying to decide if I should go through the hassle of removing the studs and
>skimming the hub surface (to true it up) or not.
>
>-- Randall
>
>** triumphs at autox.team.net **
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/triumphs/tony@tonydrews.com