[TR] Camshaft Plug Sealing

[Frank Fisher]

hylomar.
never goes hard, never leaks
Frank


________________________________
From: John & Pat Donnelly <pdonnel1 at san.rr.com>
To: 'Triumph List'
<Triumphs at autox.team.net> 
Sent: Tuesday, February 28, 2012 7:56 PM
Subject:
[TR] Camshaft Plug Sealing

On the last TR engine rebuild I used JB Weld two
part epoxy to seal up the
rear camshaft plug. Well after about 8 years it
developed a leak. Eventually
the leak worsened as the engine got hot.



Now
that I have the engine out I can see that the epoxy had some cracks, and
was
able to  easily chip it  out using a screwdriver.



So, what should I use to
seal this plug up once and for all?



Johnnie

'67 TR4A

**
triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com