[TR] TR4 upper A-arms front suspension?
tr3a58 at verizon.net
Sat Dec 22 12:21:44 MST 2012
Big curve to the front and shallow to the rear. This is to angle the verticle
link to the back for 3 degrees caster. Must have trunnions that are right
side and left side, not the same.
On Dec 22, 2012, at 2:06 PM, TR250Driver at aol.com wrote:
> Hey Guys,
> I'm working on the 63 TR4's front suspension. This is the later type with
> front & back upper A-arms. I am confused for some reason as to which is
> which? Yikes I should know this! I am going to say that the arm with the
> bigger curve in it is the front. Then the one that is not curved as much
> the back. I'm looking at the various assembly diagrams and I can't really
> tell from those. I don't want to be wrong and have a do over. Can a
> confirm this? I would really appreciate it.
> ** triumphs at autox.team.net **
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
More information about the Triumphs