[TR] TR6 clutch taper pin? (Mark J Bradakis)

[Geo Hahn]

Or both 1 & 4:

http://members.cybertrails.com/~ahwahnee/cross%20bolt.JPG

On Fri, Dec 21, 2012 at 10:02 AM, Alan Myers <amfoto1 at aol.com> wrote:

> ...There are several possible solutions...
>
> 1. Get one of the better grade, upgrade taper pins available.
>
> 4. Or, drill the yoke and shaft straight through and put a 1/4" Grade 8
> bolt
> through it instead of the pin...