[TR] Exhaust question

[Wbeech]

That is correct, sorry if I was not clear.  SOP always calls for the leading
pipe to be inserted inside the following one in the direction of flow.
 
Slots are only the width of a hacksaw blade, so no real distortion or
leakage.
 
BB

  _____  

From: Geo Hahn [mailto:ahwahneetr at gmail.com] 
Sent: Friday, December 21, 2012 9:46 AM
To: Wbeech
Cc: Andrew Uprichard; triumphs at autox.team.net
Subject: Re: [TR] Exhaust question


On Fri, Dec 21, 2012 at 8:13 AM, Wbeech <wbeech at flash.net> wrote:


... and the aluminum extension from TRF.  I did have to cut four slots
about 1.5" deep at the attachment end in order to bring it down to size so
the stock wire clamp would secure it.

 
 
In that case it would seem to be quite a bit oversized as (as I recall) the
extension normally fits over the exhaust pipe. 
 
Geo