[TR] Adding a VSS pulse generator inline with speedometer cable

[Brad Kahler]

I'm waiting for it to become readily available over the counter at the
local FLAPS :)


On Tue, Aug 14, 2012 at 9:29 PM, Jerry Van Vlack <jerryvv at roadrunner.com>wrote:

> Next thing will be a Flux Capacitor!
>
> -----Original Message----- From: Brad Kahler
> Sent: Tuesday, August 14, 2012 7:40 PM
> To: Triumphs
> Subject: Re: [TR] Adding a VSS pulse generator inline with speedometer
> cable
>
> Well a bunch of you have suggested/recommended the magnets on the drive
> shaft option.  I did find a magnet setup that was about $20 cheaper than
> Amazon  http://www.summitracing.com/**parts/RPC-250-4165/?rtype=10<http://www.summitracing.com/parts/RPC-250-4165/?rtype=10>
>
> I will check out Susquehanna Motorsports as suggested by Phil.
>
> I'm going to search a little while longer trying to find someone that will
> modify a speedometer cable to work with a pulse generator but at least I
> have a fall back option that is not all that expensive.
>
> Thanks!
>
> Brad