[TR] wiring question

[Joseph Laurito]

Never mind....if you are talking about the coil you must be in the engine
bay. When you said brake safety, some people refer to the hand brake as the
safety brake.

Joe

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Andrew Uprichard
Sent: Thursday, September 01, 2011 8:15 AM
To: 6pack at autox.team.net; triumphs at autox.team.net
Subject: [TR] wiring question

I am installing a new harness in my TR250 (thanks to Marv Gruber) and have
come across two wires I cannot account for. They arise adjacent to the brake
safety, and are both about 3 inches long.  One is white and one black.
There were no corresponding wires in the old harness.

 

I am assuming the black is a ground, but the white?  By the way, this is not
the ignition feed to the coil, which comes off in a loom about a further
down the main harness.  Does anyone have any ideas?

Andrew Uprichard


triumphs at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/trglory@verizon.net