[TR] Tonneau Lift-a-Dot Fastener Orientation

[Randy and Valerie DeRuiter]

Bill-

Mechanically, I think you want the lettering on the outside edge, just because
that's the way the fasteners release a little easier when you lift that dot!

Randy




> Date: Fri, 28 Oct 2011 12:05:39 -0700
> From: wsb1960tr3a at att.net
> To: triumphs at autox.team.net
> Subject: [TR] Tonneau Lift-a-Dot Fastener Orientation
>
> My tonneau recently gave it up and ripped beyond repair. I have already
> repaired/patched it twice and the California sun has done its thing. Last
time I
> put Lift-A-Dot fasteners on I oriented them so the writing was towards the
> outside of the tonneau edge. However, the Lift-A-Dot fasteners have a flat
edge
> on one side and I was wondering it that should be the side facing outboard
on
> the car (it is opposite of the side with the writing). Which way is correct?
It
> probably doesn't matter anyway and who reads the Lift-A-Dot fasteners on an
old
> dog TR3 anyway...
> Just wondering. Probably putting fasteners on the tonneau this weekend.
> TIA
>
> -Bill in Tehachapi
>
>
> triumphs at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/deruiterville@hotmail.com