[TR] Pertronix Ignition

[Joe Laurito]

I missed that too. Look in your package and there should be a little clear
plastic square that you use to gap the pickup. And make sure you have the
magnet sleeve sitting squarely on the points cam.

Joe Laurito

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Ron Olds
Sent: Sunday, May 01, 2011 9:27 AM
To: Triumphs (triumphs at autox.team.net)
Subject: [TR] Pertronix Ignition

Hello,

I recently purchased a Pertronix electronic ignition for my 72 TR6 and have
a question regarding the installation.  Is there supposed to a gap set
between the Ignitor module and the magnet sleeve.  I see it is adjustable
but can't find anything on the gap setting.

Thanks for the help.

Ronald Olds
_______________________________________________