[TR] Brake Bleeder Screw (up)

[Dave1massey at cs.com]

In a message dated 6/30/2011 11:37:51 AM Central Daylight Time, 
anabil007 at comcast.net writes: 
> Finally finished replacing the differential, and AnnaBelle and were 
> bleeding the rear brakes ... no problem.  When I went to the front I 
> was dismayed to find the bleeder screw was snapped off level with the 
> caliper ...  Checked the other side and found the screw intact but 
> when I tried to loosen it, it was clear that it was "frozen" in place 
> so I stopped.
> 
> Any way ... short of replacing the calipers ... that this can be fixed ??
> 

I never snapped mine off but in fear of doing so I started bleeding my 
calipers by loosening the cross-over pipe.  But that was before I sent them off 
to Peter for rebuilding and he got them out somehow.  The bleeders work just 
fine now, thank you.  

Not literally replacing but a remove and rebuild operation.  Call Peter at 
NOS Imports and see what he says.  Wouldn't you like some stainless steel 
pistons anyway?

NFI Just a satisfied customer.

Dave