[TR] Triumphs Digest, Vol 4, Issue 16

[Andrew Uprichard]

And I used wire wheels on the original studs and didn't have any problem
with the studs being too long.

Andrew Uprichard

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Randall
Sent: Friday, June 17, 2011 4:31 PM
To: 'Don Spence'; triumphs at autox.team.net
Subject: Re: [TR] Triumphs Digest, Vol 4, Issue 16

> If you are changing from wires to solid wheels, you really need to  
> replace the wheel studs with the longer ones meant for solid wheels. 

While I agree, I am curious : Has anyone actually had a short stud fail when
used with the steel wheel nuts (and not under racing conditions) ?

I ran a lot of miles with steel wheels on wire wheel studs and never had any
problems.  Of course I'd never suggest doing that to anyone else!

-- Randall  
triumphs at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net