[TR] Shaking TR3
tfansher at comcast.net
tfansher at comcast.net
Fri Jun 17 13:54:01 MDT 2011
Dave, "easy-peasy"?????
Tom
----- Original Message -----
From: Dave1massey at cs.com
To: triumphs at autox.team.net
Sent: Friday, June 17, 2011 3:24:08 PM
Subject: Re: [TR] Shaking TR3
In a message dated 6/17/2011 1:14:57 PM Central Daylight Time,
dkspence at telus.net writes:
> That only works going the other way. Steel to wires. Your product
> would only exacerbate an already dangerous situation as in preventing
> the lug nuts from a full "grasp" of the studs
>
I think that's what he meant. If you have wires and spacers you can remove
the spline hubs and spacers and bolt up a steel wheel. Easy-peasy.
Dave
triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/triumphs/tfansher@comcast.net
More information about the Triumphs
mailing list