[TR] HS6 Linkage Bracket

[Randall]

> In looking at the linkage on my HS6 setup, I find that the bracket between
> the carbs has a worn screw-hole for the pivot screw. This induces some
slop
> in the accelerator travel, and I'd like to reduce that slop.

Revington TR seems to offer the bracket, P/N 145072, 26.73 GBP.

But as I understand it, the pivot screw is supposed to have a shoulder that
pulls up tight against the bracket with a nut & lockwasher on the other
side.  If so, wear in the hole should not cause slop in the linkage.

-- Randall