[TR] TR3A rear fendor bolt removal

[wbeech at flash.net]

Ouch, if yours are anything like mine were you will end up ringing them off
or drilling them out.  After that you will pull the fender and take it to
the body shop and say "Fix this" 

If you still have something to grab onto, try a breaker bar, or vise grips.
I found that a manual lever-type action can apply more sustained torque than
an impact.

Bill



-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of davewillner
Sent: Monday, June 13, 2011 8:36 AM
To: triumphs at autox.team.net
Subject: [TR] TR3A rear fendor bolt removal

Installing the fender beading and need help in finding a tool out there that
makes removing the screws (inside the boot) that holds the rear fenders
tight a little easier than a simple impact driver? I've soaked the nuts and
my cheap impact driver and did break two free, but that's it....

Appreciate it

Dave Willner
Stroudsburg PA
59 TR3A
70 MGB
70 BSA 441 VS
triumphs at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/triumphs/wbeech@flash.net