[TR] TR2/3 temp. gauge & capilliary tube.

[Bill]

Route it Left, coil up the excess (not less than 3 inches diameter) 
tie wrap coil where ever it suits you ... enjoy.


>Hello List:
>Just getting at re-installing the temp. gauge & tube in my '2. How 
>important is it to follow the manual diagram on routing the tube to 
>the right and around the heater, then to the fire-wall hole? Seems a 
>much more direct path if you stay to the left and approach the 
>fire-wall hole that way. May need a loop in the tube to take up some 
>length. Any problems with deviating from the original routing?
>Also, have a couple of screw clips on my tube. Just find a 
>convenient place on the heater rails to attach these? Must say, have 
>forgotten how this came out...
>Thanks for any help with this.
>Angelo Graham
>triumphs at autox.team.net


-- 
"Thinking is the hardest work there is. That's why so few people 
undertake it." - Henry Ford
Bill Pugh
1957 TR3
"Casper"
TS16765L
Wallace, CA