[TR] Cleaning Stainless Steel

[Joe Curry]

If it is matte finish stainless and not the really bright stuff, many people
use a Scotch-Bright pad.

Joe

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of cfmtr3a at verizon.net
Sent: Thursday, June 09, 2011 5:56 AM
To: triumphs at Autox.Team.Net
Subject: Re: [TR] Cleaning Stainless Steel

I would start with the cleaning as Dave suggests.  But I would probably test
which grade w/d to start with on a hidden spot. 1000 grit or even higher
might do the job with less abrasiveness.    Real fine grade steel wool is
another option.  

C



Jun 9, 2011 12:09:02 PM, Dave1massey at cs.com wrote:

In a message dated 6/8/2011 9:37:16 PM Central Daylight Time,
thenicholls at verizon.net writes: 

I am a bit of a clean freak.  I have a  Bell stock stainless steel exhaust
system on my 72 TR6 installed in 2006.  I would like to cleanup the visible
pipes, anyone on the list have any advice on cleaning stainless steel?
Anyone worked with any cleaning products?



I would first clean off any oil or grease with a good detergent.  What is
left is backed on carbon and corrosion.  That I take off with #400 wet/dry
sandpaper.  Depending on how shiny you want you can clean up with #600 and
#1000 grit w/d sandpaper after that.

Dave 

triumphs at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net



Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive
triumphs at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/triumphs/spitlist@cox.net



Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive