[TR] TR3A body number tags

[Frank Fisher]

by the way
i have a source of original looking rivets for the vin tags. not pop rivets.
frank




________________________________
From: "Dave1massey at cs.com" <Dave1massey at cs.com>
To: triumphs at autox.team.net
Sent: Tue, January 25, 2011 1:41:06 PM
Subject: Re: [TR] TR3A body number tags

In a message dated 1/25/2011 3:27:17 PM Central Standard Time, 
dwillner at ptd.net writes: 
> Were the two brass body number tags (over the battery) on the firewall 
> originally riveted in place like the commission plates, or just screwed in 
> with brass slotted screws...I have screws on mine, but have seen several 
> riveted lately.  Thanks 
> 

For some reason I had it in my mind that they were held in with screws.  So 
I put mine in with screws.  Stainless.  Slotted.  Just like the factory 
would have.  Except the stainless part.  I might have to ding myself a few 
points at the next concours.

Dave
_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account: 
http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com