[TR] TR4 interior and seat belts

pethier at comcast.net pethier at comcast.net
Sun Jan 23 22:09:46 MST 2011


> The seat belts on my 63 are attached to 2 each eye bolts. One each on
> each 
> side of the drive shaft tunnel and one each on the inside of the B
> post.
> 
> There should be a very thick 1/4" plate on the inside of the wheel
> wells. The 
> b post bolt goes through this and has a lock washer and lock nut. If
> you need 
> the part #s let me know and I can look them up.
> 
> I am not sure what size the bolt is but I am guessing about 5/8"
> 
> Bob

Virtually every car equipped with seat belts from the factory uses bolts which are 7/16-fine.  Even metric cars.  I took an eyebolt out of an MGB and put it in a Miata.

Phil Ethier


More information about the Triumphs mailing list