[TR] What do you use to clean greasy parts?
Darrell Walker
darrellw at ipns.com
Wed Feb 23 08:06:24 MST 2011
Hi Chris,
The system I used the last time was:
1. Wipe as much as possible off with paper towels (lots of paper towels).
2. Spray with Simple Green or citrus-based degreaser, wipe with more paper towels. Be careful with aluminum parts, some of the degreasers will stain. Scrub with toothbrushes (small areas) or a kitchen brush.
3. Wash in hot/warm, soapy water. If you don't have a sink for this, get a plastic tub. If the part is prone to rust, wipe some clean oil on it after drying.
-Darrell
--
Darrell Walker
66 TR4A IRS CTC67956L
Vancouver, WA, USA
More information about the Triumphs
mailing list