[TR] Dream Shop

[THOMAS FANSHER]

Tim Studdard TR3 racecar and TR6 driver and editor of  Classic Motorsport 
magazine is doing a piece on redoing his garage here's the link to the site.
http://classicmotorsports.net/
It's kind of a neat magazine headquartered in Holly Hill, Fl just half an 
hour from me.  The series may help some.
Tom
----- Original Message ----- 
From: <wbeech at flash.net>
To: "'Triumphs'" <triumphs at autox.team.net>; <british-cars at autox.team.net>; 
<mgs at autox.team.net>
Sent: Saturday, August 27, 2011 7:10 PM
Subject: [TR] Dream Shop


>I have the unprecedented opportunity to move into a near-virginal 30x30 
>shop
> next week.  Does anyone have any ideal plans as to a layout for a shop
> almost exclusively dedicated to the hobby?
>
> There is a 12' wide O/H door at one end and a 10' wide door at the other. 
> I
> am probably going to put my two workbenches. Bead blast cabinet and two 
> roll
> around boxes on one wall with rack storage on the other.  This still 
> leaves
> me a lot of floor space for Tarbaby and I still need to have room for a 
> few
> racks of parts and tools.  Another want, after I recuperate financially,
> would be a lift.  Please don't suggest another LBC, that would put me over
> the edge.
>
> Any floor plan suggestions, drawings or pictures would be appreciated.
> Maybe I should invite Jay Leno over for a consult?
>
> Have a great w/e!
>
> TIA,
> Bill
>
>
> Bill Beecher
> '58 TR-3A TS30766L  "Tarbaby"