[TR] TR-3B Head Replacement

[Geo Hahn]

On Mon, Aug 15, 2011 at 7:31 PM, David Ljung Madison
<team.net at daveola.com>wrote:

>
> http://i1214.photobucket.com/albums/cc499/Ahwahnee18/20awgWireAroundCylinder.jpg
>
> I don't quite see it...
>

20 awg is only about 1/32" so it is hard to see, can mostly see the wire at
12:00 and 6:00 on the righthand cylinder.

There are 2 methods being discussed -- one involves a groove machined in the
head, the other (simpler, possibly more ghetto) is just a wire sandwich.

As I recall Randall had liners that were not evenly proud of the block and
the wire was added to help the gasket seal.

Geo