[TR] TR4A - Handbrake Cable Routing

[Jerry Van Vlack]

Guy, I didn't see a response so here goes. The cables are not pinched 
between the body and the frame. It looks like they would be there is room 
for them to cross the cross member. The body should not sit on that cross 
member.
As for the button, give Scott Harper a call at 330-392-7176, he may have 
what you need.
JVV

----- Original Message ----- 
From: "Guy D. Huggins" <guy at genfiniti.com>
To: <triumphs at autox.team.net>; <RedRiverTriumph at yahoogroups.com>
Sent: Monday, September 20, 2010 10:59 PM
Subject: [TR] TR4A - Handbrake Cable Routing


> All,
>
> Can someone tell me how to properly route the handbrake cables for a TR4A?
> Right now they exit the rear brake attachment, go back then loop forward
> passing between the rear cross member and the body tub, then on through 
> the
> holes and into the tub itself.
> Surely this cannot be right, because they will be pinched between the tub 
> and
> the cross member, but for the life of me I cannot find an alternative.
>
> Also, does anyone know where I can source the button that one depresses to
> lower the handbrake lever.
> I've got the rod, but the end is exposed, and it hurts to push on.
>
>
>
> Cheers,
>
> Guy D. Huggins
> 1965 Triumph TR4A
> CTC 63569LO
>
> Online project diary at http://www.genfiniti.com/triumph
>
> _______________________________________________
> Triumphs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/triumphs/jerryvv@roadrunner.com