[TR] How much for a clutch job

thenicholls at verizon.net thenicholls at verizon.net
Thu Sep 16 08:49:47 MDT 2010


Nope, their parts.  Clutch, pressure plate, throw-out bearing, cross shaft, bearing, fork, taper pin, and push rod, 1 year warranty.........Craig


Sep 16, 2010 10:45:18 AM, djsforza at gmail.com wrote:

It really depends on how many times the mechanic has done a clutch job...
for a TR it's a little wierd: removing the interior, etc.

I did my TR4 twice... once for the clutch and then a month later to replace
the newly replaced release bearing. By the time I got around to doing the
TR6, I was really good a tearing it apart. I did the TR4 twice more... once
to replace the tranny with an OD, then again to fix the OD that wasn't
working.

After all that, I can have a tranny on the floor, working alone, (with no
grease on the upholstery) in an hour and a half or two. I'd say the $1100 if
you're supplying the parts, is excessive... $800???

On Thu, Sep 16, 2010 at 10:08 AM, Ed Woods wrote:

> Randall,
>
> So, how many hours for a clutch job and how much for the parts? $1100 for a
> shop charging, what? $60-$75 and hour?, doesn't seem excessive.
>
> Granted, you or I might do it for 1/2 that, but we're stuck in the 50's and
> don't have the overhead.
>
> Ed
> _______________________________________________
> Triumphs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/triumphs/djsforza@gmail.com

_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/triumphs/thenicholls@verizon.net


More information about the Triumphs mailing list