[TR] information on various penetrating oils

[mntr3a at aol.com]

Machinist's Workshop Mag (tm)recently published some information on various
penetrating oils that I found very interesting. Some of you might appreciate
this. the magazine reports they tested penetrants for break out torque on
rusted nuts.
They are below, as forwarded by an ex-student and professional machinist.

They arranged a subjective test of all the popular penetrants
with the control being the torque required to remove the nut from
a "scientifically rusted" environment.

*Penetrating oil .......... Average load*
None ........................... 516 pounds
WD-40 ..................... ... 238 pounds
PB Blaster .................... 214 pounds
Liquid Wrench ............... 127 pounds
Kano Kroil .................... 106 pounds
ATF-Acetone mix...............53 pounds

The ATF-Acetone mix was a "home brew" mix of 50 - 50 automatic
transmission fluid and acetone. Note the "home brew" was better
than any commercial product in this one particular test.

Pat Bob