[TR] TR3A (Late) Boot Seal

[wbeech at flash.net]

Same here, out and at the top, but I had to lay a light coat of contact
cement to keep it in place.

Bill Beecher
'58 TR-3A TS30766L  "Tarbaby"
www.triumphowners.com/1566
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"


 

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Anthony Cascio
Sent: Sunday, October 17, 2010 8:53 AM
To: cfmtr3a at verizon.net
Cc: triumphs at autox.team.net
Subject: Re: [TR] TR3A (Late) Boot Seal

Out toward the channel, and seam at the top.
That's the way I was told seems to work fine on my 3A.
Also I didn't use any glue to hold the seal in place, once it's pushed into
the channel it pretty much stayed there.



Tony Cascio
58 TR3A
TS27093L
allegrorover at mac.com
www.triumphowners.com/1489

_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/triumphs/wbeech@flash.net