[TR] TR3 Upper Fulcrum Bolts

cfmtr3a at verizon.net cfmtr3a at verizon.net
Sun Nov 21 12:48:34 MST 2010


Bill - Both sides of mine are as you describe the left side.  Do they actually bottom out on something or just stop 'threading'?  Are the cage nuts in place?  


Nov 21, 2010 05:18:00 PM, wsb1960tr3a at att.net wrote:

     On the left side of my TR3A the upper fulcrum is held in by four bolts. The inner bolts have nyloc nuts and the outer bolts go through a caged or captive nut on the frame somehow. I haven't actually had the spring out and looked.
     On the right side the bolt arrangement is the same except the outer bolts only thread in about 3 threads and then bottom out. The threads are feeling a little "soft" as well. The DPO had put bolts in with 3 and 4 lock washers. This has been bugging me so I pulled the shock and spring so I could look underneath. Sure enough, the bolts don't go through. What gives? What is there supposed to be? Can someone take a look at a frame and tell me?
     My car took a hard hit to the front right corner long ago with the DPO.
I've been tearing around in the car for about 18 years and it has stayed on this long with all of the reckless driving I've done before I knew. Maybe I should just put the bolts in and forget about it. 
I've done this post before, but that was before I had it all apart to see what I have.
This is my daily driver/work car so I need to get it back on the road by Monday the 29th.
     Any ideas?

     -Bill in Tehachapi

_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account: http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net



More information about the Triumphs mailing list