[TR] Punch Set

wbeech at flash.net wbeech at flash.net
Sun Mar 14 13:14:36 MST 2010


And remember, even if you are not a perfectionist... Neither was the guy at
Coventry who did it the first time, while the numbers on my original plate
are straight they are not on the line.   

Bill

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Carl TR
Sent: Sunday, March 14, 2010 11:50 AM
To: triumph list
Subject: Re: [TR] Punch Set

Harbor Freight has them in the $8-9 (less if on sale) range.  Online at
harborfreight.com search on number punch.

I'm sure some of the other tool sources has them as well.

Carl


----- Original Message -----
From: "TeriAnn J. Wakeman" <tjwakeman at gmail.com>
To: "triumph list" <triumphs at autox.team.net>
Sent: Sunday, March 14, 2010 1:12 PM
Subject: Re: [TR] Punch Set


> Jim wrote:
>> I had mine done at a local machine shop.
>>
>
> I just purchased the 1/8th inch punches I needed, clamped down the plate 
> with a straight edge and used the straight edge to align the punches as I 
> punched in the number myself.
>
> No big deal and punches are cheap.
>
> Teriann

_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/triumphs/wbeech@flash.net


More information about the Triumphs mailing list