[TR] Pos Ground v. Neg Ground

[HANS DEFERRANTE]

> For negative ground, the "-" or "SW" terminal of the coil should be
> connected to the distributor, the other to the wiring harness.  For  
> positive
> ground, the "+" or "CB" terminal goes to the distributor.

Randall, are I you sure this is necessary?  I did not do this on  
mine; I  only re-polarized the generator and swapped the ammeter  
leads and she has been running beautifully. Electronically, I don't  
see how it makes any difference. Is there something I am missing or  
that could ultimately be harmful?
  Although not related to the Lucas coil's polarity, the only thing I  
wondered about was if the capacitor (condenser) across the points was  
polarized, but I didn't see any evidence of that.

Hans


>
> _______________________________________________
> Triumphs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/triumphs/ 
> tr3 at roadrunner.com