[TR] Commission Plate Question

[John Macartney]

Might be an idea to compare those 1/4" and 1/8" measurements and see what they
are in metric. Should be 3mm and 6mm (rounded) It was at about this time that
the UK started metricating a lot of things - but by no means all of them and
we're still using imperial and metric measurements for different things - oh,
and driving on the left as well :)

Jonmac
To: triumphs at autox.team.net;
6-Pack Triumphs <6pack at autox.team.net>
Sent: Fri, 11 June, 2010 0:11:46
Subject: [TR] Commission Plate Question

> Could someone confirm the lettering
size for the 1974 commission plate.
> From what I've seen (mostly on e-Bay),
it looks to me like the date and
> the paint and trim codes are 1/8", while
the commission number itself is
> 1/4", but I think I've seen a few plates
where the date too was 1/4".
> 
> Thanks,
> BobW
> Montgomeryville, Pa.
(suburban Philadelphia)
> 1974 TR6

[demime 1.01d removed an attachment of
type application/ms-tnef which had a name of winmail.dat]
_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/triumphs/macartney.john@yahoo.co.uk