[TR] HIF SU Carb

[Marc Nederkoorn]

Hi Al,

If I recall the HIF carb's on the MG are 1 3/4" which would require at least 
some different parts for a rebuild, compared to your 1 1/2" carbs.

You can get the right rebuild kit or parts in the UK:

www.burlen.co.uk

The parts you want for your carbs are probably on this page:

http://www.sucarb.co.uk/ExplodedImageClassic.aspx?ProductId=10504


The Burlen website is somewhat complicated, however these guys are very 
helpfull if you give them a call.

NFI,

Marc

(lurker - the Netherlands)


Message: 4
Date: Fri, 29 Jan 2010 20:41:10 -0500
From: "Al Salvatore" <tr6parts at charter.net>
Subject: [TR] HIF SU Carb
To: <triumphs at autox.team.net>
Message-ID: <A793C1F25E2346DDA8B980A047F76280 at Alan>
Content-Type: text/plain; charset="us-ascii"

I pulled a set of HIF SU 1 1/2" carbs and intake out of the trunk of a
spitfire thats been sitting in a parts yard since the 80's.
Apparently the engine was sold out of the car and the carbs were put in the
trunk.


I didn't think Spits came with HIF carbs; or did they?

I'am in the process of rebuilding them.   I don't see them listed in the 
parts
catalog.
I'am assuming the MGB hif parts will work. ( seals, ect.)
Moss lists those.


Thanks

Al