[TR] [6pack] Wing or Side Fender Vents

[Frank Fisher]

could well be.
i also have no front license plate.
i could argue that the
front bumper has no "safety" properties, but im done for sure on the license
plate.
even with a fix it note to the principle, its still 25.00 each
infraction.
ill get it done one day

but more important and completely off
topic, whats going on with the habs?
Frank
________________________________
From: Mark Hooper <mhooper at digiscreen.ca>
To:
Frank Fisher <yellowtr3 at yahoo.com>
Cc: "triumphs at autox.team.net"
<triumphs at autox.team.net>
Sent: Wed, January 20, 2010 4:46:23 PM
Subject: RE:
[TR] [6pack] Wing or Side Fender Vents


Hi Frank:
B 
Ibm up in Montreal ,
where we are more hidebound. However, I was under the impression that any
change to the safety equipment of a vehicle would mean it had to be inspected
as a new custom machine; and that would mean complete adherence to modern
standards. Of course, I could be way off base. 
B 
As noted by another lister,
itbs possible that you can just swap it out and hope that nobody stops you
on the road and gives out one of those 48-hour tickets. B 
B 
Cheers,
B 
Mark
B 
B 

________________________________

From:Frank Fisher
[mailto:yellowtr3 at yahoo.com] 
Sent: January 20, 2010 7:31 PM
To: Mark Hooper
Cc: triumphs at autox.team.net
Subject: Re: [TR] [6pack] Wing or Side Fender
Vents
B 
i didn't think it was illegal to have no front bumper.
im running my
TR3 with no bumper, cos i don't own one yet.
but then im in California where
one can run with open wheels
Frank
B 

________________________________
From:Mark Hooper <mhooper at digiscreen.ca>
To: "triumphs at autox.team.net"
<triumphs at autox.team.net>; "6pack at autox.team.net" <6pack at autox.team.net>
Sent:
Wed, January 20, 2010 9:24:13 AM
Subject: Re: [TR] [6pack] Wing or Side Fender
Vents

That's a nice look. Question - How does one get street papers for a car
with
the original bumper removed? In most places I have heard of that would be
a
no-no. The picture makes it seem that the car was driven to the location it
was at.

Mark
1972 TR6

-----Original Message-----
From:
6pack-bounces at autox.team.net [mailto:6pack-bounces at autox.team.net] On
Behalf
Of Foster, Stan (HP IT)
Sent: January 19, 2010 11:40 PM
To: Jim Jones;
fot at autox.team.net; triumphs at autox.team.net;
6pack at autox.team.net;
tony at tonydrews.com; N197TR4 at cs..com; gsfuqua1 at aol.com
Subject: Re: [6pack]
Wing or Side Fender Vents

Here is a TR4 with those vents installed. I liked
this TR so much I may have
drooled on it.
http://i38.photobucket.com/albums/e119/foster461/NET%20VTR%202007/TR4.jpg
Stan

-----Original Message-----
From: 6pack-bounces at autox.team.net
[mailto:6pack-bounces at autox.team.net] On
Behalf Of Jim Jones
Sent: Tuesday,
January 19, 2010 9:51 AM
To: fot at autox.team.net; triumphs at autox.team.net;
6pack at autox.team.net;
tony at tonydrews.com; N197TR4 at cs.com; gsfuqua1 at aol.com
Subject: Re: [6pack] Wing or Side Fender Vents

Do you have a link to a
picture of these vents?

JJ

--- On Tue, 1/19/10, gsfuqua1 at aol.com
<gsfuqua1 at aol.com> wrote:


From: gsfuqua1 at aol.com <gsfuqua1 at aol.com>
Subject:
[6pack] Wing or Side Fender Vents
To: fot at autox.team.net,
triumphs at autox.team.net, 6pack at autox.team.net,
tony at tonydrews.com,
N197TR4 at cs.com
Date: Tuesday, January 19, 2010, 2:46 AM


I am looking for a
set of the chrome grill vents that many of the Rally TR
4's used.B  As I
recall they were slightly squarish in size and had a large
checker board grill
affect.B  The idea being to let some of the engine bay
heat be carried out
through the side wings or fenders.B  The fit flush with
the side of the fender
or wing and extend inward into the engine bay.

Any help would be greatly
appreciated.

Cheers, Gary