[TR] SAE verses UNC

dave1massey at cs.com dave1massey at cs.com
Sun Jan 10 13:44:11 MST 2010


In a message dated 1/10/2010 12:55:00 PM Central Standard Time, 
thenicholls at verizon.net writes: 
> Is a 1/4 inch X 1 1/2" UNC bolt the same as a 1/4 inch X 1 1/2" SAE fine
> thread?B B  Looks like it is the same by my searches on the web.
> 

As was mentioned, the C is for coarse (20 TPI) and UNF would be fine (28 
TPI).  My contribution is that I don't recall ANY coarse thread bolts 
associated with the TR6 hard top so look for 1/4-28 bolts.

Dave


More information about the Triumphs mailing list