[TR] 1157 Turn Signal Bulbs

[Bill]

Make sure the new bulb does NOT say " Made in China" ...  GE is the best.


>Thanks Jim,
>      I filed the contacts on the bottom down and it still won't go 
>in. I filed them down pretty far too. Still won't go in.
>
>      -Bill
>
>--- On Wed, 12/1/10, Jim <cartr4a at ameritech.net> wrote:
>
>From: Jim <cartr4a at ameritech.net>
>Subject: Re: [TR] 1157 Turn Signal Bulbs
>To: "William Brewer" <wsb1960tr3a at att.net>, "triumph list" 
><triumphs at autox.team.net>
>Date: Wednesday, December 1, 2010, 9:32 PM
>
>Is it close to twisting in?  I found that a few times I've had to 
>file the bottom contacts down a little so the bulb goes in deeper.
>
>Jim


-- 
"Thinking is the hardest work there is. That's why so few people 
undertake it." - Henry Ford
Bill Pugh
1957 TR3
"Casper"
TS16765L
Wallace, CA