[TR] Proper crankcase ventilation - 1975 TR6

[Robert Jones]

Look at Richard Good's solution.  Works great for me.
Bob

Sent from my iPhone

On Aug 27, 2010, at 10:29 AM, rtrickey at aol.com wrote:

> Need some suggestions/guidance for ensuring the engine in my (new to
> me) 1975
> TR6 is properly breathing.  The original emission controls for this
> car have
> been altered and the only breathing the crankcase is doing is thru a
> hose from
> the top of the rocker cover to a bTb connector and then to the
> base of the
> two down draft webers.  There is no EGR valve or any other place
> where the
> crankcase is ventilated.
> There is oil in the carburetors and also some oil is blowing by the
> oil filler
> cap on the rocker cover.  All of this can not be good for the engine
> and the
> previous owner drove this car quite a bit.
> What suggestions does anyone have for getting this engine to
> properly breathe.
> Is there some simple setup with a PCV that can be used?  Thanks in
> advance for
> your suggestions.
> Rebe
>
>
>
> =
>
> _______________________________________________
> Triumphs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/triumphs/rjones@wfeca.net