[TR] TR2/3 radiator mounting

KingsCreekTrees at aol.com KingsCreekTrees at aol.com
Sat Aug 21 17:51:26 MDT 2010


Hi  Angelo;
 
Here's  what the TR Register in Australia has to say about that:
 
"This  trick makes it a little easier to remove & fit the bottom radiator 
bolts.  Cut a screwdriver slot in the threaded end of the machine screw. Once 
it is  loosened with a spanner , it can be removed & replaced with a 
screwdriver.  Tighten finally with a spanner. Use anti-seize on the thread to keep 
it free to  turn."
 
Tim


More information about the Triumphs mailing list