[TR] Crankcase venting.

[tom white]

I would like to weigh in a little.  When building a dry sump engine for racing
one of the sections of the pump is dedicated to pulling a vacuum off the
crankcase.  The goal is not to equalize pressure between the head and
crankcase but to eliminate the pressure.

Best regards,

Tom



> From: tr3driver at ca.rr.com
> CC: triumphs at autox.team.net
> Date: Wed, 7 Apr 2010 15:25:50 -0700
> Subject: Re: [TR] Rear oil seal leak
>
> > One, I switched to "text" for e-mail.  Does that solve the problem of
> > the indiscriminate "B"s that appeared in my e-mails?
>
> Looks good from here, Terry.  Thanks!
>
> I'll have to look to be certain, but I've probably got a road draft tube or
> three, lying about somewhere.  If nothing else, I could start parting out
> the engine I removed from TS39781LO (which was actually a much earlier
short
> block), which is currently sitting in the middle of the garage floor with
> the hoist resting on top of it.
>
> -- Randall
>
> _______________________________________________
> Triumphs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/triumphs/tswhitez123@hotmail.com
>

_________________________________________________________________
Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL
:en-US:WM_HMP:042010_1