[TR] TR3 Speedo Reading
Rick
chandler.rick at comcast.net
Wed Sep 23 13:37:58 MDT 2009
Bill,
Measure across the flats on the cable ends; they should be 0.125" across. If
they are oversized, as most recent Moss cables are, they will not fully
insert into the transmission drive, which results in a compressed cable,
erratic readings, and finally death to the speedo. The cure is to simply
grind (carefully) the sides down until you achieve the right distance
between flats and the cable end smoothly and fully enters the tranny
receptacle. The speedo recepticle is more tolerant to an oversized cable.
Rick Chandler
2414 73rd Avenue SE
Mercer Island WA 98040
Home 206 236 8662
Cell 206 909 8408
[demime 1.01d removed an attachment of type image/jpeg which had a name of image001.jpg]
More information about the Triumphs
mailing list