[TR] TR4A Sputtering - Partially Solved

[Joe Curry]

I have never had one fail.  They are solid state devices and much less prone
to failure than points and condenser.

JOe

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Ed Woods
Sent: Saturday, September 19, 2009 5:46 AM
To: triumphs at autox.team.net
Subject: Re: [TR] TR4A Sputtering - Partially Solved

And 50 bucks when the Pertronix module fails!

Ed Woods
----- Original Message ----- 
From: "Joe Curry" <spitlist at cox.net>
To: "'Brian Thomas'" <thomasb at queensu.ca>; <triumphs at autox.team.net>
Sent: Friday, September 18, 2009 10:10 PM
Subject: Re: [TR] TR4A Sputtering - Partially Solved


> Brian,
>
> While you are at it, why not install a new Pertronix.  It will be far more
> reliable and should it ever fail, you can just quickly slip in a set of
> points and condenser to get you on your way.
>
> Joe
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive