[TR] TR4a solid axle mounting point - need to find one.
Randall
tr3driver at ca.rr.com
Mon Sep 14 21:39:07 MDT 2009
> I do have one blocking issue however, which is that my
> drivers side rear
> mounting point where the lever link arm goes is oval shaped
Just a thought, Tom, you could probably have a local welding shop weld up
the hole and then re-drill it.
Or, drill/ream it oversize and install a sleeve. Most hobby shops carry
thin-wall tubing that can be cut to length for a sleeve.
Randall
More information about the Triumphs
mailing list