[TR] Triumphs Digest, Vol 3, Issue 414

carlsereda carlsereda at aol.com
Thu Sep 3 15:52:17 MDT 2009


Would you advise to pin the shaft after the fact if you have one of 
the pressed on style (bought supposedly as NOS @ and for sure @ NOS 
pricing!)?
Carl

> Check the side clearances too and if necessary replace
> the rotor and pump ring.

If you do replace the rotor though, check to be sure that the new one 
is
pinned to the shaft. I've read several reports of replacement rotors 
that
were pressed onto a splined shaft, and fail quickly in use.

-- Randall


More information about the Triumphs mailing list