[TR] TR2/3 front suspension rebuild question

[Angelo Graham]

Hello List:
Once again, the wisdom of the list is required regarding a front 
suspension rebuild, specifically the lower outer (trunnion) pivot.
The inner steel washers get a rubber sealing band around them, 
correct? What about the outer paired steel washers - the flat one and 
the collared one. These fit together. Do they get a rubber band 
around them as well? The red manual mentions a "grease seal". Is this 
the rubber band around these paired washers??
How important is the manual instruction on seating the splines on the 
washers by tapping the lower control arms "out"?
Thanks for any help with this.
Angelo Graham