[TR] tr3 dash switch tool

[wbeech at flash.net]

I bought one at Harbor Freight for about $4.00 item #36554
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=36554.  
Had to grind the pins from their original round to a flat configuration but
it works great.

Bill Beecher
'58 TR-3A TS/30766 L (On the road in 2009!)
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"


 

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Frank Fisher
Sent: Tuesday, September 01, 2009 9:55 PM
To: triumphs at autox.team.net
Subject: [TR] tr3 dash switch tool

i seem to recall someone on the list makes the tubular special wrench for
use on the dash switches for the tr3.
any one care to own up?
Frank
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive