[TR] small dust boot/cover ? tear?

[Bud Rolofson]

Cutting corners when it comes to brakes is never OK.


Bud Rolofson

71TR6 CC57365 (Good 6)
66TR4A CTC57806 (The Wreck-Almost parts)
66TR4A CTC57529 (The Project)
71F-250 Camper Special (Triumph Support Vehicle)
Z-50A Hardly Davidson 1977 Honda Mini-Trail Bike (Triumph Pit Bike)
levilevi at comcast.net




On Oct 29, 2009, at 9:37 PM, dorpaul wrote:

> List,
> Would it be real bad if I were to install a dust cover for my TR3's  
> caliper
> brake piston which had a 1/2" tear in the rubber where it attaches  
> to the top
> grove in the caliper pot? (lifting up and under the skirt of the  
> flat dust
> cover allows me to see almost 1/2" of the piston's silver side)
>
> Since it is only the dust cover that has this little 1/2" tear, it  
> proably is
> ok...right?
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
>
> http://www.team.net/archive