[TR] Re-Tapping Threads
Dave1massey at cs.com
Dave1massey at cs.com
Tue Oct 20 06:20:21 MDT 2009
In a message dated 10/19/2009 9:34:44 PM Central Daylight Time,
suhringtr36 at comcast.net writes:
> Can you re-tap threads using a smaller threads per inch tape? I have a
> screw
> hole that is a size #6 with 36 thread and I can only get a #6 screw with
> 32
> thread screw. Can I tap the 36 thread hole with a 32 tap and use the 32
> thread screw without messing up the threads? Hope this is clear....
>
Are you sure they are not metric? Have you tried an M4 with a .7 pitch?
Dave
More information about the Triumphs
mailing list