[TR] Re-tapping

[FordneyNJ at aol.com]

Scott,  Enco  has 6-36 tap listed.  _http://www.use-enco.com_ 
(http://www.use-enco.com) 
 
NFI
 

Rodney Ford,  Brick, NJ
President, Positive Earth Drivers Club
TR4A IRS CTC 60536  L
TR7 Spider  TPVDJ8AA400612




------------------------------

Message:  14
Date: Mon, 19 Oct 2009 22:07:23 -0400
From: "Scott Suhring"  <suhringtr36 at comcast.net>
Subject: [TR] Re-Tapping Threads
To:  "Triumph Mail List" <triumphs at autox.team.net>
Message-ID:  <CC2A492396024DBCA7E39FFDB548FBE9 at Scott>
Content-Type: text/plain;  charset="us-ascii"

Can you re-tap threads using a smaller threads per  inch tape? I have a 
screw
hole that is a size #6 with 36 thread and I can  only get a #6 screw with 32
thread screw. Can I tap the 36 thread hole with a  32 tap and use the 32
thread screw without messing up the threads?  Hope  this is clear....

Scott Suhring
Mechanicsburg, PA
'70 TR6
'59  TR3