[TR] Tr- gauge repair

[Bob Danielson]

Larry............ I'm in Connecticut but why does it have to be in the 
northeast? A number of the TR6 guys have had their gauges calibrated by West 
Valley Instruments in California. Morris will typically turn them around in 
about 10 days. This is not a refurbishing of the gauges to concours like new 
condition but it is a thorough cleaning and calibration to stock. Check out 
my link with the West Valley info. Morris only does British gauges and di 
both my speedo and tach. The best advice I can give you is that if the 
repair shop doesn't ask about the speedo/tach cable, look for another shop. 
The cable dimensions/accuracy is as critical as the gauge. What are you 
looking to have done?

http://tr6.danielsonfamily.org/SpeedometerCalibration.htm

Bob

Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection,
Toyota 5 speed & Nissan LSD
http://tr6.danielsonfamily.org

--------------------------------------------------
From: <L1J1S at aol.com>
Sent: Sunday, November 29, 2009 8:06 PM
To: <triumphs at autox.team.net>
Subject: [TR] Tr- gauge repair

> List, can someone rec' a place to have some gauges repaired in the
> northeast.  larry shwartz
>
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
>
> http://www.team.net/archive